Xlogic Functions; General Input & Output Functions; Inputs - Easy Electronics xLogic Micro PLC User Manual

You can add comments to the circuit program and create hard-copies.
3.
You save a copy of your circuit program to the file system on your PC, to make it
4.
directly available for any modifications.
It takes only a few key actions to download the circuit program to xLogic.
5.
Under Simulate mode in xLogicsoft, you can study how to program via the panel
6.
key.

6.1 xLogic Functions

ELC series adapts programming methods by means of function blocks. A total of 9 general function blocks,
37 special function blocks, and 11 input & output function blocks are configured. And each block can
achieve a specific control function independently, e.g. TOND, TOFD, SBPL, TBPL, SCHD, etc. As several
blocks are linked up in a specific way, relatively complicated control functions can be performed.
Programming with function blocks is simpler and better appreciated than the conventional PLC
instruction programming.
The following types of operator for xLogic function blocks are available for options：
6.2 General Input & Output functions

6.2.1 Inputs

Input blocks represent the input terminals of xLogic. Up to 8 digital inputs are available to you.
In your block configuration, you can assign an input block a new input terminal, if this terminal
is not already used in the circuit program.
86