Easy Electronics xLogic Micro PLC User Manual page 207

Please refer the property dialog box of B003, it can record the output status .The start address is from 0
and it must record the 20 outputs with continuous addresses.
And the record file shows below:
Per the program, every 6 seconds the record will do once, and the Q1, Q2, Q3, Q4, Q11 will be all "ON".
You can see the record file and you'll see the recording time and the status of the output.
Note: 1.The ELC-MEMORY only can be inserted into the RS232 port ( programming port) of ELC series
CPU.
2.If this function block is working ,the RS232 port ( programming port) will be
occupied ,some data will be being transferred , if you want to use the programming
207