Easy Electronics xLogic Micro PLC User Manual page 5

The device/system may only be set up and used in conjunction with this documentation. Commissioning
and operation of a device/system may only be performed by qualified personnel. Within the context of
the safety notices in this documentation qualified persons are defined as persons who are authorized to
commission, ground and label devices, systems and circuits in accordance with established safety
practices and standards. Please read the complete operating instructions before installation and
commissioning.
EASY does not accept any liability for possible damage to persons, buildings or machines, which occur
due to incorrect use or from not following the details.
Prescribed Usage
Note the following:
Warning
This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers
which have been approved or recommended by EASY. Correct, reliable operation of the product requires
proper transport, storage, positioning and assembly as well as careful operation and maintenance.
Trademarks
All names identified by xLogic are registered trademarks of the EASY. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights
of the owner.
Copyright Easy 2007all rights reserved
The distribution and duplication of this document or the utilization and transmission of its contents are
not permitted without express written permission. Offenders will be liable for damages. All rights,
including rights created by patent grant or registration of a utility model or design, are reserved.
Disclaim of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However,
the information in this publication is reviewed regularly and any necessary corrections are included in
subsequent editions.
5