Weekly Timer - Easy Electronics xLogic Micro PLC User Manual

Description of the function
Output Q is set to 1 with a 0 to 1 signal transition at Trg.
If output Q = 0, and input Trg is set hi at least for the duration of TL, the permanent lighting function is
enabled and output Q is set accordingly.
The off delay time T is triggered when the status at input Trg changes to 0 before the time T
Output Q is reset when the Ta = T.
Before the off delay time (T - T
duration of the off pre-warning time T
Caution
The time base for the T, T
!
If retentivity is not set, output Q and the expired time are reset after a power failure.

6.5.11 Weekly timer

Caution
Your xLogic must be equipped with an internal real-time clock if you are going to use this SFB.
Short description
The output is controlled by means of a configurable on/off date. The function supports any combination
of weekdays.
Connection
Parameter
123
) has expired, you can output an off pre-warning that resets Q for the
!
. A further signal at input Trg always resets T and output Q.
!L
and T must be identical.
!L
Description
At the No1, No2, No3 (cam)
parameters you set the on and
has expired.
L