Set Parameter - Easy Electronics xLogic Micro PLC User Manual

4.3.2 Set parameter

If you want to select a parameter, you need do as the following procedures:
1. Under the FUNCTION PAGE, select
"Set parameter": Press
2. Confirm by pressing OK key.
Then xLogic displays the first parameter, so you can modify as you like. If there is no parameter to
set/modify, you can press ESC key to return.
3. Select parameter you intend to modify.
4. Select certain specific value of that parameter which you want to edit, then press OK key.
How to modify parameter?
A. First select certain parameter which you need to edit by following the below procedures:
1. Under the FUNCTION PAGE, select
"Set parameter": Press
49
or key
or key