Table of Contents
Advertisement
7
Using the ATMOS VideoScope (PED)
7.1
Switching on
& The ATMOS VideoScope (PED) is switched on and off with the on / off switch
(see picture).
& An image can be saved with the save button. For further details on image
storage, see the instructions for the image processing software.
7.2
Inserting, bending and removing the insertion
hose
1.
The insertion hose must be carefully inserted into the regions to be
examined (nose and throat). If necessary, the distal end can be adjusted by ±
120 ° with the adjustment lever. The level of adjustment should be checked
in a free trial. The examining doctor holds the ATMOS VideoScope in his hand
enabling him to control the adjustment of the distal end and observe the
image on the display.
12
Using the ATMOS VideoScope (PED)
Save button
on/off switch
status LED
connector
Advertisement
Table of Contents
