Power Indicators
g
Button Labels
The numbered translucent covers on the input and output buttons can be removed and
replaced to insert labels behind them.
Input and output labels can be created easily with the Extron Button Label Generator
software, which ships with every Extron matrix switcher. Each input and output can be
labeled with names, alphanumeric characters, or color bitmaps for easy and intuitive input
and output selection (see figure 12) (see
labeling software, see
for removing and replacing the translucent covers).
10
DVD
Figure 12.
Rear Panel Power Indicators
The two power supply modules (primary power supply and redundant power supply,
see figure 13) each have a 2-color LED.
Figure 13.
a
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Primary and Redundant Power Supply LEDs —
Green — Indicates that the associated power supply is operating
within normal tolerances.
Red — Indicates that the associated power supply is operating
outside the normal tolerances, has failed, or (DMS 3600 only) is not installed (see
"Maintenance and
Modifications" to replace the power supply).
Unlit (DMS 1600 Redundant LED) — No power supply is installed.
"Maintenance and
13
VCR
Computer
30
31
Document
Camera
Sample Button Labels and Icons
PRIMARY POWER SUPPLY
100-240V
50/60Hz 1.2A MAX.
100-240V
50/60Hz 1.2A MAX.
Rear Panel Power Supply Indicators
Primary and Redundant Power Supply LEDs —
Green — Indicates that the associated power supply is operating within normal
tolerances.
Red — Indicates that the associated power supply has failed (see
Modifications" to replace the power supply).
"Matrix
Software" for details on using the
Modifications" for blank labels and a procedure
15
17 18
Computer
VTG 200
32 33 34 35 36
REDUNDANT POWER SUPPLY
1
DMS 1600 and DMS 3600 • Operation
POWER SUPPLY
PRIMARY
REDUNDANT
Redundant Power
1
Supply is Optional
for DMS 1600, Blank
Panel is Standard
"Maintenance and
19