Extron electronics DMS 1600 User Manual page 32

3. Select an input: Press and release the input 5 button.
1 2 3
1 2 3
The output buttons for outputs that are not tied to
Input 5 are either unlit or background illuminated.
NOTE:
You can also view a set of ties by selecting a tied output. Demonstrate this
as follows:
1. Note the number of a lit output button, and then press and release the
2. Observe that all of the untied outputs light.
3. Press the output button that you noted previously.
4. Observe that the selected output button, the tied input button (input 5),
4.
Exit View-only mode: Press and release the View button to exit View-only mode.
Press the button.
VIEW
The View button returns to unlit
or background illumination.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Press the button. It lights.
INPUTS
4 5 6 7 8
The output buttons for outputs
that are tied to input 5 light.
4 5 6 7 8 15 16
OUTPUTS
output button for an untied (unlit or background illumination) output.
and the output buttons light for all of the outputs that are tied to the
input.
All input buttons and output buttons
return to unlit or background illumination.
15 16
DMS 1600 and DMS 3600 • Operation 26