d
Preset button — The Preset button has two primary functions (
functions (•):
❏
Activates Save Preset mode to save a configuration as a preset and Recall Preset
mode to activate a previously-defined preset.
❏
Blinks when Save Preset mode is active and lights steadily when Recall Preset mode
is active.
•
In the I/O Group mode, selects group 2 and indicates its selection (see
Grouping").
•
Selects 19200 baud for the RS-232/RS-422 port in Serial Port Selection and
Configuration mode and indicates its selection (see
Remote Port Protocol and Baud
•
With the View button, indicates that the front panel lock has been toggled on or off
"Locking the Front Panel (Executive
(see
e
View button — The View button has one primary function (
functions (•):
❏
Selects and indicates View-only mode, which displays the current configuration.
NOTE:
•
In the I/O Group mode, selects group 3 and indicates its selection (see
Grouping").
•
With the Esc button, commands the front panel system reset (see
System Reset from the Front
•
Selects 38400 baud for the RS-232/RS-422 port in Serial Port Selection and
Configuration mode and indicates its selection (see
Remote Port Protocol and Baud
•
With the Preset button, indicates that the front panel lock has been toggled on or
"Locking the Front Panel (Executive
off (see
f
Esc button — The Esc button has two primary functions (
functions (•):
❏
Cancels operations or selections in progress and resets the front panel button
indicators.
NOTE:
❏
Flashes once to indicate that the escape function has been activated.
•
In the I/O Group mode, selects group 4 and indicates its selection (see
Grouping").
•
Selects 115200 baud for the RS-232/RS-422 port in Serial Port Selection and
Configuration mode and indicates its selection (see
Remote Port Protocol and Baud
•
With the Enter button, toggles the front panel lock on or off (see
Front Panel (Executive
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Rate").
View-only mode also provides a way to mute and unmute the outputs
(see
"Muting and Unmuting
Panel").
Rate").
The Esc button does not reset the current configuration or any presets..
Rate").
Mode)").
❏
) and three secondary
"Selecting the Rear Panel
Mode)").
❏
) and four secondary
Outputs").
"Performing a
"Selecting the Rear Panel
Mode)").
❏
) and three secondary
"Selecting the Rear Panel
"Locking the
DMS 1600 and DMS 3600 • Operation
"I/O
"I/O
"I/O
18