Installing The Power Supply Module - Extron electronics DMS 1600 User Manual

Installing the Power Supply Module

NOTE:
Install a power supply module as follows:
1.
Orient the power supply module to be installed with the LED to the right.
2. Align the flanges on the power supply module with the left and right plastic chassis
guides (see figure 60).
3.
Gently slide the power supply module into the enclosure until the power supply meets
resistance.
4.
Gently seat the power supply in the backplane.
5. Tighten the left and right screws with a screwdriver to lock the power supply in place.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The power supply modules are hot-swappable. You do not need to power down
the switcher to install a power supply.
DMS 1600 and DMS 3600 • Maintenance and Modifications 107