Signal-detection options
to:
•
Automatically refresh the display every 10 seconds.
•
Update the display whenever you refresh the screen.
•
Never sample and display the link status
Icons in I/O Boxes
Program window (see
Numbers in I/O Boxes
Program window and fills each box with the associated input or output
number.
Catch FPC/other's changes
configuration and setting changes to the serial port or Ethernet connection that turned
this selection on. These reports allow the Matrix Switchers Control Program to track
the changes that occur in the configuration and settings of the switcher, whether
commanded via the front panel, either serial port, or the Ethernet port.
Master-Reset selection
Master reset performs all of the following functions:
•
Clears all ties
•
Clears all presets
•
Clears all output mutes
•
Resets all I/O grouping
NOTE:
Master reset does not reset the Internet protocol (IP) settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
— Allows you to set the signal presence feature as follows,
— Erases any numbers in the I/O boxes in the Control
figure
27). You can place icons in the boxes.
— Erases any icons in the I/O boxes in the Control
— When checked, sets the switcher to report all
DMS 1600 and DMS 3600 • Matrix Software
82