Extron electronics DMS 1600 User Manual page 87

— Allows you to assign a name to each of the memory presets.
Name presets
NOTES: •
•
Show RS-232 Strings
configuration. You can refer to these for SIS programming.
I/O group settings
Room configuration
rooms.
NOTE:
A Room is a subset of outputs that are logically related to each other, as
determined by the operator. The DMS matrix switcher supports up to 10
rooms, each of which can consist of from 1 to 16 outputs.
— Initializes and clears any or all of the following: ties, presets, preset names,
Initialize
icon names, and icons.
Preferences menu
Immediate Changes
immediately.
Hold/Verify Changes
changes until the
Ties as Lines
Ties as Crosspoints
outputs (see figure 41). Ties that have been made are indicated as amber or green
boxes. Ties that will take effect when you click the
that will be broken when you click the
Figure 41. Ties Shown as Crosspoints
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Preset names are limited to 12 upper- and lower-case alphanumeric
characters, space, and the _ and / characters.
The following characters are invalid or not recommended in preset names:
+ ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
— Displays the ASCII commands that are used by the current
— Allows you to establish I/O groups.
— Allows you to assign outputs to rooms or delete outputs from
— Causes configuration changes to take effect
— Delays implementation of configuration
Changes – Take button is pressed.
— Displays ties as lines (below).
— Displays ties as a matrix of inputs and
Take
DMS 1600 and DMS 3600 • Matrix Software
button are indicated by +. Ties
Take
button are indicated by –.
81