I/O Boards - Extron electronics DMS 1600 User Manual

I/O Boards

Figure 5 shows a mix of boards. On the boards, the input and output DVI connectors on the
I/O boards are identified as A through D. Each I/O board is identified by the input and output
numbers supported by the board position (1 - 4, 5 - 8, and so on).
Location A
Input
ANAHEIM, CA
Location A
Input
Figure 5.
Slot
1
2
3
4
Locations A through D correspond to the input and output numbers identified by the board
position numbers. (For example, the input and output numbers supported by the I/O board
in location 5 - 8 are as follows: A = 5, B = 6, C = 7, and D = 8.) Inputs and outputs are grouped
separately, with inputs A through D on the left and outputs A through D on the right.
There are certain rules for configuring the DMS matrix switcher for proper operation, as
detailed below:
•
The top slot (slot 1) must contain a 4x4 DVI input and output board.
•
The next slot (slot 2) can contain any of the three board types (a 4x4 DVI input and
output board, 4 DVI input board, or 4 DVI output board) or a blank panel.
•
A 4x4 DVI input and output board can be followed (in the slot directly underneath it) by
any of the board types.
•
After you insert a 4 DVI input board or 4 DVI output board, all active boards underneath
it must be the same type.
• If you install a blank panel, all slots under it must contain blank panels (you cannot skip
a slot).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Input 1 Input 2 Input 3 Input 4
DVI-D INPUTS
A B C
DVI-D INPUTS
A B C
PRIMARY POWER SUPPLY
100-240V 50/60Hz 1.2A MAX.
Input 5 Input 6 Input 7
Arrangement of Inputs and Outputs on the I/O Boards
Inputs and outputs Slot
1 through 4 5*
5 through 8 6*
9 through 12 7*
13 through 16 8*
9*
* DMS 3600 only
Output 1 Output 2 Output 3
DVI-D OUTPUTS
D A B C
DVI-D OUTPUTS
D A B C
DVI-D OUTPUTS
A B C
REDUNDANT POWER SUPPLY
Input 8 Output 10
Output 9 Output 11
Inputs and outputs
17 through 20
21 through 24
25 through 28
29 through 32
33 through 36
DMS 1600 and DMS 3600 • Installation
Location D
Output 4
Output
Slot 1
D
(1-4) Input/Output
Board
Slot 2
D
(5-8) Input/Output
Board
Slot 3
D
(9-12) Output Board
Slot 4
No board installed
Output 12
Location D
Output
9