Extron electronics DMS 1600 User Manual page 11

Upgradeable firmware — The firmware that controls all switcher operation can
be upgraded in the field via RS-232/RS-422 or Ethernet, without taking the switcher
out of service. Firmware upgrades are available for download on the Extron website,
www.extron.com, and can be installed using the Matrix Switchers Control Program or the
built-in HTML pages.
Labeling — The included Button Label Generator software lets you create labels to place in
the front panel I/O buttons, with names, alphanumeric characters, or color bitmaps for easy
and intuitive input and output selection. Alternatively, labels can be made with any Brother
®
P-Touch or comparable labeler.
®
Global memory presets — 32 global memory presets are available as a time-saving feature
that lets you set up and store input/output configurations in advance. You can then recall
those configurations, when needed, with a few simple steps. The presets are available via
front panel operation or serial port or Ethernet control.
Rack mountability — The DMS matrix switchers are housed in rack-mountable metal
enclosures with mounting flanges for standard 19-inch racks.
Front panel security lockout modes (Executive mode) — If a matrix switcher is installed
in an open area, where operation by unauthorized personnel may be a problem, a security
lockout mode can be implemented. When the front panel is locked, a special button
combination or SIS command is required to unlock the front panel controller and make the
front panel fully operational.
I/O grouping — Allows the matrix switcher to be virtually divided into smaller subswitchers,
making installation and control easier. I/O grouping limits the selection of inputs and
outputs to members of the same group. I/O grouping allows specific outputs, such as those
designated for a specific purpose, to be grouped together.
DMS 1600 and DMS 3600 • Introduction 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com