Extron electronics DMS 1600 User Manual page 30

Example 3: Removing a tie from a set of ties
In the following example, an existing tie is removed from the current configuration. The
steps show the front panel indications that result from your action.
NOTE:
This example assumes that you have performed
1. Clear all selections: Press and release the Esc button. The button flashes once.
2.
Select an input: Press and release the input 5 button.
1 2 3
The Output 1, Output 3, Output 4, and Output 8 buttons light
to indicate the ties created in example 1 and example 2.
1 2 3
3. Select the output: Press and release the output 4 button.
1 2 3
4.
Confirm the change: Press and release the Enter button.
Press the button.
ENTER
The Enter button returns to
unlit or background
illumination.
The current configuration is now input 5 tied to output 1, output 3, and output 8.
Input 5 tied
to outputs 1, 3, and 8
Input
5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Press the button.
The button lights.
INPUTS
4 5 6 7 8 15 16
4 5 6 7 8 15 16
OUTPUTS
Press and release the Output 4 button.
The button blinks to indicate that the
selected input will be untied from this output.
4 5 6 7 8 15 16
OUTPUTS
All input buttons and output buttons
return to unlit or background illumination.
1
3
Output
8
example 1
and
C O N T R O L
VIEW
ENTER PRESET
The Enter button blinks
to indicate the need to
confirm the change.
DMS 1600 and DMS 3600 • Operation
example 2.
ESC
24