X-Press™ Human Machine Interface; Diagnostic Indication - Datalogic DS4800 Reference Manual

2
2.3 X-PRESS™ HUMAN MACHINE INTERFACE
X-PRESS™ is the intuitive Human Machine Interface
designed with the precise goal of improving ease of
installation and maintenance.
Status and diagnostic information are clearly presented
by means of five-colored LEDs, whereas the single
multi-function key gives immediate access to relevant
functions:
Autosetup to self-optimize reading performance
•
in demanding applications
Autolearn to self-detect unknown barcodes
•
Focus Lock to memorize the mechanical focus
•
position
Test Mode with bar-graph visualization to check
•
static reading performance
X-PRESS™ is the common interface adopted in all new products: "You learn one, you can
use them all".
The colors and meaning of the five LEDs when in the one of the operating modes (On-Line,
Automatic or Continuous) are illustrated in par 2.1.1.
Except for the Focus Lock/Unlock function, the X-PRESS™ fu
work if the motor or laser are turned off, see chp. 9 for details.
NOTE

2.3.1 Diagnostic Indication

The "STATUS" and "READY" LEDs blink simultaneously to signal the presence of a failure.
Diagnostic message can be enabled to provide details about specific failure conditions.
T hese messages will be shown on the display and if enabled for transmission, also on the
selected interfaces.
At the same time one or more LEDs lig t up a
READY
GOOD
TRIGGER
LEARN
COM
TEST
STATUS
DS4800 also shows specific diagnostic messages on its display, see par. 2.4 for details.
22
h
FOCUS
SETUP
DS4800 REFERENCE MANUAL
ccor ding to the foll
LED STATUS
READY BLINK
ON to indicate any Failure differ
GOOD
Motor or Laser failures.
TRIGGER ON to indicate a Motor Failure.
COM ON to indicate a Laser Failure.
STATUS BLINK
nctions do not
owing scheme:
ent than