Siemens SINUMERIK 840Di Function Manual page 1665

5.2 Setting data
5.2
5.2.1 Channel-specific setting data
Number Identifier: $SC_
42000 THREAD_START_ANGLE
42010 THREAD_RAMP_DISP
42100 DRY_RUN_FEED
42101 DRY_RUN_FEED_MODE
42110 DEFAULT_FEED
42600 JOG_FEED_PER_REV_SOURCE
43300 ASSIGN_FEED_PER_RES_SOURCE
5.2.2 Axis/spindle-specific setting data
Number Identifier: $SA_
43210 SPIND_MIN_VELO_G25
43220 SPIND_MAX_VELO_G26
43230 SPIND_MAX_VELO_LIMS
Feeds (V1)
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Description
Start angle for thread
Run-in and run-out path of feed axis with thread
cutting
Dry run feed
Dry run feed mode
Default value for path feed
In the JOG mode, revolutional feedrate for geometry
axes on which a frame with rotation acts
Revolutional feedrate for positioning axes
Description
Minimum spindle speed
Maximum spindle speed
Spindle-speed limitation with G96
Data Lists
5.2 Setting data
5-3