Managing the DeviceMaster
Uploading Firmware to Multiple DeviceMasters
You can use this procedure if your DeviceMaster is connected to the host PC, laptop, or if the DeviceMaster
resides on the local network segment.
1. If you have not done so, install PortVision DX
2. Shift-click the multiple DeviceMasters on the Main screen that you want to update and use one of the
following methods:
•
Click the Upload button.
•
Right-click and then click Advanced > Upload Firmware.
•
Click Advanced >Upload Firmware in the Manage menu.
3. Browse, click the firmware (.cmtl) file, Open (Please locate the new firmware), and then click Yes (Upload
Firmware).
It may take a few moments for the firmware to upload onto the DeviceMaster. The DeviceMaster reboots
itself during the upload process.
4. Click Ok to the advisory message about waiting to use the device until the status reads ON-LINE.
In the next polling cycle, PortVision DX updates the Device List pane and displays the new firmware version.
52 - Managing the DeviceMaster
(Installing PortVision DX
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
on Page 22) and Scan the network.