Uploading Firmware To Multiple Devicemasters - Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual

Managing the DeviceMaster

Uploading Firmware to Multiple DeviceMasters

62 - Managing the DeviceMaster
You can use this procedure if your DeviceMaster is connected to the host PC,
laptop, or if the DeviceMaster resides on the local network segment.
1. If you have not done so, install PortVision DX
Page 32) and Scan the network.
2. Shift-click the multiple DeviceMasters on the Main screen that you want to
update and use one of the following methods:
• Click the Upload button.
• Right-click and then click Advanced > Upload Firmware.
• Click Advanced >Upload Firmware in the Manage menu.
3. Browse, click the firmware (.cmtl) file, Open (Please locate the new firmware),
and then click Yes (Upload Firmware).
It may take a few moments for the firmware to upload onto the DeviceMaster.
The DeviceMaster reboots itself during the upload process.
4. Click Ok to the advisory message about waiting to use the device until the
status reads ON-LINE.
In the next polling cycle, PortVision DX updates the Device List pane and displays
the new firmware version.
DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B
(Installing PortVision DX on