External Power Supply Specifications
This section discusses information that you may need if you wish to use your own external power supplies.
•
1-Port Panel Mount 5-30VDC Power Supply
•
EIP-2101 and EIP-2201: 1-Port DIN Rail Power Supply
•
EIP-2202 and EIP-2402: 2-Port (Serial Terminals) Power Supply
•
EIP-2102 and EIP-2302: 2-Port DB9 Power Supply (Bottom)
•
EIP-2102 and EIP-2302: 2-Port DB9 Power Supply (Top)
•
EIP-2304: 4-Port DIN Rail Models Power Supply
•
4-Port Panel Mount Power Supply
1-Port Panel Mount 5-30VDC Power Supply
This table provides specifications for the power supply shipped with the
DeviceMaster 1-port panel mount.
Comtrol Power Supply: 1-Port 5-30VDC
Input line frequency
Input line voltage
Output voltage
Output current
This table provides the specifications, if you intend on using your own
power supply.
Comtrol device 1-Port 5-30VDC External Power Supply
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage, power, and
connector pin outs requirements can be used.
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
on Page 73
on Page 74
on Page 78
on Page 78
43-63 Hz
90-260 VAC
24VDC
500 mA @ 24VDC
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
on Page 75
on Page 76
on Page 77
Screw Terminal Connector
Earth Gnd
External Power Supply Specifications - 73
Return
-
5-30VDC
+
Positive
Wire gauge:
AWG 12-22