Table of Contents
Advertisement
Chapter 9. System Menus
This section discusses the web pages under the System menu:
•
Update Firmware
on Page 119
•
Configuration File Page
•
System Snapshot Page
•
Restore Defaults Page
•
Reboot
on Page 125
9.1. Update Firmware
You can upload firmware (EtherNet/IP-Modbus or Bootloader) using the System | Update Firmware page. You
must first unpackage the firmware from the .msi file.
Note: Optionally, you can use PortVision DX to upload firmware after unpackaging the .msi file.
Use the following procedure to upload the latest firmware onto the DeviceMaster EIP-MOD.
1. If necessary, download the firmware from the
2. Execute the enetipmodbus-x.x.msi file.
3. Click the Next button.
4. After reviewing the license, click I accept the terms in the License Agreement and the Next button.
5. Click the Next button or browse to the location you want the files stored.
6. Click the Install button.
7. Click Yes to the Do you want to allow this app to make changes to your device pop up message.
8. Click the Finish button.
9. Open your web browser and enter the IP address of the DeviceMaster EIP-MOD.
10. Click the System menu, which opens the Update Firmware page.
11. Click the Browse button, navigate to the file, select it and click the Open button.
12. Click the Update button.
Chapter 9. System Menus
on Page 121
on Page 123
on Page 124
Comtrol download
site.
User Guide: 2000664 Rev. A - 119
Advertisement
Table of Contents
Troubleshooting
