Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual page 63

DeviceMaster in the Device List pane, and click Webpage. Click the Network | Security and verify that the
Enable Telnet/ssh option is enabled, If it is not, click the option and then click Save, and close the web
interface.
4. Type Reset, press Enter, and close the telnet session.
5. Quickly re-open the telnet or SSH session using the previous steps.
6. Select Telnet or SSH, leave the Selected Port number, and click Ok.
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
Managing the DeviceMaster
Managing the DeviceMaster - 63