Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual page 60

Managing the DeviceMaster
3. Right-click the DeviceMaster for which you want to update, click Advanced > Upload Firmware, browse to
the Bootloader .cmtl file, and then click Open.
4. Click Yes to the Upload Firmware message that
warns you that this is a sensitive process.
5. Click Ok to the second Upload Firmware message.
6. Right-click the DeviceMaster and click Refresh until the
Bootloader version displays in the Device List pane and
verify that the new version loaded.
60 - Managing the DeviceMaster DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C