Eip-2304: 4-Port Din Rail Models Power Supply; 4-Port Panel Mount Power Supply - Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual

External Power Supply Specifications

EIP-2304: 4-Port DIN Rail Models Power Supply

This table provides the specifications to purchase a power supply for a DeviceMaster EIP-2304 4-port (DIN
rail).
This table provides specifications if you intend on using your own power supply.

4-Port Panel Mount Power Supply

This table provides the specifications for the power supply shipped with the
DeviceMaster 4-port.
Comtrol Power Supply: 4-Port
Input line frequency
Input line voltage
Output voltage
Output current
This table provides the specifications, if you intend on using your own power
supply.
78 - External Power Supply Specifications
Positive†
Return†
5-30VDC
PW1
† Wire gauge: AWG 12-22
EIP-2304: 4-Port DIN Rail
External Power Supply
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage,
power, and connector pin outs requirements can be used.
47 - 63 Hz
90 - 260 VAC
24VDC
500 mA @ 24VDC
External Power Supply: 4-Port
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage,
power, and connector pin outs requirements can be used.
Positive†
Chassis
5-30VDC
Ground†
PW2
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
9-30VDC
200 mA (Min) @ 24VDC
4.8 W
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
+VDC
V Return - GND
Shield GND
Housing Molex P/N:
39-01-4030
Pins Molex P/N:
44485-1211