Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual page 26

Preparing the DeviceMaster for Configuration
• Highlight the DeviceMaster, click the Manage menu and then Properties.
6. Optionally, rename the DeviceMaster in the Device Name field.
Note: The MAC address Device Status fields are automatically populated and you cannot change those values.
7. Optionally, enter the serial number, which is on a label on the DeviceMaster.
8. If necessary, you can change the Detection Type.
• REMOTE means that the DeviceMaster is not connected to this segment of the network and it uses IP
communications, not MAC communications.
26 - Preparing the DeviceMaster for Configuration DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C