Eip-2102 And Eip-2302: 2-Port Db9 Power Supply (Top) - Comtrol DeviceMaster EIP Series Hardware Installation And Configuration Manual

EIP-2102 and EIP-2302: 2-Port DB9 Power Supply (Top)

This table provides the specifications to purchase a power supply for a DeviceMaster EIP-2102 and EIP-2302
2-port DB9 DIN rail.
Note: The power supply for this model is on the top of the unit. The product serial numbers are above xxxx-
030000, where xxxx is the first four digits of the serial number.
This table provides specifications if you intend on using your own power supply.
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
† Wire gauge: AWG 12-22
Positive†
Return†
5-30VDC
PW1
EIP-2102 and EIP-2302: 2-Port DIN Rail
External Power Supply
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage,
power, and connector pin outs requirements can be used.
Positive†
Chassis
Ground†
5-30VDC
PW2
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
External Power Supply Specifications
External Power Supply Specifications - 77