Table of Contents
Advertisement
Managing the DeviceMaster
Loading Configuration Files
Use the following procedure to load configuration files.
1. If necessary, enter the IP address in your browser.
2. Click System | Configuration File.
3. Click the Browse button and select the configuration file. The default configuration file name is:
dm_xxx.xxx.xxx.xxx.ds
Where xxx.xxx.xxx.xxx is the IP address and .ds is the file extension.
4. Select the categories that you want to load and then click the Load Configuration button.
DeviceMaster EIP | UP Hardware Installation and Configuration Guide: 2000633 Rev. C
Managing the DeviceMaster - 57
Advertisement
Table of Contents
Troubleshooting
