Table of Contents
Advertisement
Modbus/TCP Connections Page
8.6. Modbus/TCP Connections Page
Access the Modbus/TCP Connections page by clicking Diagnostics | Modbus Diagnostics | Modbus/TCP
Connections.
Slave Mode (From Master) Modbus/TCP Connections
Note: Only displayed if active connections.
Remote
The Modbus/TCP master connection in IP Address:Port Number format
Connection
(xxx.xxx.xxx.xxx:pppp).
The local TCP/IP port on the DeviceMaster EIP-MOD. The standard Modbus/TCP
Local IP Port
port of 502 is always enabled. Optionally, up to seven additional Modbus/TCP ports
may also be enabled.
Displays the number of Modbus requests that have been received since the connection
Rx Requests
was opened.
Displays the number of Modbus responses that have been transmitted since the
Tx Responses
connection was opened.
Time Since Open
The time that has elapsed since the connection was opened.
104 - Chapter 8. Diagnostic Menus
Modbus/TCP Connections Page
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Advertisement
Table of Contents
Troubleshooting
