Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual page 152

| Configuring an I/O Ethernet Module on a ControlLogix PLC
3. Scroll down and select Generic Ethernet Module.
4. Click OK. The following pane appears.
a. Enter a Name.
b. Select the Comm Format as Data-INT.
c. Enter the IP Address of the gateway.
d. Using the data displayed on the Class 1 Overview page, enter the Connection Parameters.
152 - Chapter 11. Class 1 Interface Definition DeviceMaster EIP-MOD User Guide: 2000664 Rev. A