Modbus To Ethernet/Ip Tag/File Diagnostics Page - Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual

Modbus to EtherNet/IP Tag/File Diagnostics Page

Invalid Message Data
Errors
System Resource Errors
First Error Description
Last Error Description

8.10. Modbus to EtherNet/IP Tag/File Diagnostics Page

Access the Modbus to EtherNet/IP Tag/File Diagnostics page by clicking Diagnostics | Data Mapping
Diagnostics | Modbus to Tag/File.
Line
Device ID
Function code
Address (base 1)
Tx Messages
Rx Messages
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
EtherNet/IP Interface Statistics Page (Continued)
Displays the number of invalid message data errors. These errors occur when
the DeviceMaster EIP-MOD receives a message that cannot be performed due
to invalid data.
Displays the number of system resource errors. These errors indicate a system
error on the DeviceMaster EIP-MOD such as an inoperable serial port or a full
transmit queue. These errors typically occur when the PLC(s) are sending data
to the DeviceMaster EIP-MOD faster than the DeviceMaster EIP-MOD can
process it.
Text description of the first error that occurred.
Text description of the last or most recent error that occurred.
Modbus to EtherNet/IP Tag/File Diagnostics Page
Displays the configuration line number.
Displays the Modbus Device ID that is being read. This may be the device ID of
either the Shared Memory or a Modbus slave device.
Displays the function code being used to perform the read operation.
Displays the Modbus address in Base 1 format.
Displays the number of read messages transmitted to the Shared Memory or
Modbus device.
Displays the number of valid read responses received from the Shared Memory
or Modbus device.
Chapter 8. Diagnostic Menus - 113