Modbus Alias Configuration - Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual

Modbus Alias Configuration

5.5. Modbus Alias Configuration
You can configure up to four alias device IDs at one time.
1. Access the Modbus Alias Device ID Configuration page by clicking Modbus | Alias Configuration.
2. Click the Add Alias Configuration button.
The following configuration options apply:
Rx Device ID
Alias Device ID
Modbus/TCP Master 
(Default = Off)
Modbus Serial Master
(Default = Off)
Modbus over TCP Master 
(Default = Off)
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Modbus Alias Device ID Configuration Page
The device ID (also often called the unit ID) of the received message
from a master. Device IDs range from 1 to 255.
The alias device ID to convert the received device ID to. Alias Device
IDs range from 1 to 255.
If selected, this applies the alias device ID configuration to messages
received from Modbus/TCP masters.
If selected, this applies the alias device ID configuration to messages
received from serial Modbus masters.
If selected, this applies the alias device ID configuration to messages
received from Modbus RTU/ASCII over Ethernet TCP/IP masters.
Chapter 5. Modbus Menus- 59