Table of Contents
Advertisement
Modbus over TCP (not Modbus/TCP) Socket Configuration Page
5.2. Modbus over TCP (not Modbus/TCP) Socket Configuration Page
Access the Modbus over TCP (not Modbus/TCP Socket Configuration page by clicking Modbus | TCP/IP
Configuration | Socket x. The following table provides information about each configuration setting.
Modbus over TCP (not Modbus/TCP) Socket Configuration Page
TCP Configuration
Connect To Mode
Enable (Default = Off)
Listen (Default = Off)
54 - Chapter 5. Modbus Menus
Modbus/RTU-to-Master – Configures the TCP/IP connection(s) to
•
communicate to Modbus/RTU master(s).
Modbus/ASCII-to-Master – Configures the TCP/IP connection(s) to
•
communicate to Modbus/ASCII master(s).
If selected, this TCP/IP socket interface will be enabled.
If selected, the TCP/IP socket interface will listen for a connection at the
specified Listen Port.
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Advertisement
Table of Contents
Troubleshooting
