Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual page 77

Modbus to Modbus Configuration Page
Save
Delete
Delete All
Add Default
Configuration
Clone Line
Sort By
(Read Device ID)
Sort By
(Write Device ID)
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Modbus to Modbus Configuration Page (Continued)
When this button is clicked:
• The settings are verified.
• Any changes are saved.
• The Data Mapping process immediately is reconfigured and begins
performing the configured operations.
If selected, the entry is deleted from the list when Save is selected.
If selected, the entire list will be deleted when Save is selected.
Adds a default entry to the end of the list. The entry will not become active
until it is saved by clicking Save.
Add a new configuration entry to the end of the list that is identical to the
entered line number. The entry will not become active until it is saved by
clicking Save.
Note: No action will be taken if the entered line number is invalid.
Reorders the list based on the Read Device ID when Save is selected.
Reorders the list based on the Write Device ID when Save is selected.
Chapter 7. Data Mapping Menus - 77