Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual page 153

| Configuring an I/O Ethernet Module on a ControlLogix PLC
5. Click OK. The following pane will appear.
a. The fastest allowable RPI is 10 ms.
b. Both Unicast, (point-to-point), and Multicast, (one-to-many), connections are supported.
6. Click OK. The module will be added.
7. View the corresponding Input and Output data tags created when the gateway module was added. Once
the PLC has connected to the DeviceMaster EIP-MOD gateway, these tags will communicate directly to
the configured Shared Memory blocks.
Input tag:
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A Chapter 11. Class 1 Interface Definition - 153