Modbus/Tcp - Comtrol DeviceMaster MOD Series Hardware Installation And Configuration Manual

Getting Started

Modbus/TCP

8 - Getting Started
• Eliminate Modbus device ID conflicts and solve device ID configuration
problems
• Enable Modbus security by blocking write messages in Read-Only Mode
• Device ID to Modbus/TCP slave via configurable IP address and TCP/IP port
• Modbus Network Bridging support
Note: You can refer to the web site for more information about
The Modbus/TCP firmware has been designed to provide maximum functionality
and flexibility with an emphasis on raw/ASCII device support. Its feature-rich
platform also supports both slave and master serial Modbus devices.
While simultaneously supporting multiple Ethernet, Modbus/TCP and serial
Modbus controllers, the Modbus/TCP firmware provides flexible connectivity to
serial Modbus slave devices and both serial and Ethernet TCP/IP raw/ASCII
devices. Not found in other gateways, the detailed diagnostic capabilities greatly
simplify setup and improve maintenance capabilities. Whether you need to
connect your PLC, SCADA system, HMI, or OPC Server to a raw/ASCII device,
such as a barcode scanner, or a Modbus serial device such as a temperature sensor,
DeviceMaster MOD | UP Hardware Installation and Configuration Guide: 2000630 Rev. B
Modbus Router.