Password Page - Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual

Password Page

6.2. Password Page
You can easily set up a password to secure the DeviceMaster EIP-MOD.
There is no password set from the factory.
Use the following information to configure a password for this DeviceMaster EIP-MOD.
1. If necessary, click Network | Password.
2. If changing an existing password, enter that password in the Old Password field.
3. Enter a new password.
4. Enter the password in the Confirm New Password field.
5. Click the Save button.
To log into the DeviceMaster EIP-MOD, you must enter the following:
admin for the username
•
• The configured password for the password
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A Chapter 6. Network Menus - 63