1.7. Locating the Latest Software and Documentation
You can use the links in this table to check for updated software or documentation.
PortVision DX
(Windows)
EtherNet/IP-Modbus
Firmware
EtherNet/IP-Modbus
Hardware Installation and
Configuration Guide
EtherNet/IP-Modbus User
Guide
(this guide)
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Software and Documentation
Use PortVision DX to manage Pepperl+Fuchs Comtrol, Inc. Ethernet-
attached devices to:
•
Scan the network for attached devices
•
View networked devices in real-time
•
Access product-specific network settings configurations
•
Assign IP addresses and network settings to one or multiple
devices
•
Upload the latest firmware or Bootloader
•
Save and load configuration files
•
Access DeviceMaster EIP-MOD configuration web pages
•
Access Telnet/SSH sessions
•
Remotely reboot devices
•
Download technical documentation
•
Enable event logging to assist in monitoring and troubleshooting
•
Create shortcuts to quickly access your favorite applications
•
Organize devices into folders and create multiple views
•
Enter notes about a folder or device
This is the application that may or may not have been loaded on the
DeviceMaster EIP-MOD depending on the model that was ordered.
You may need to use PortVision DX to load this firmware.
This contains hardware installation, configuration information, and
connector information.
This includes using PortVision DX to configure the IP address and if
necessary, how to update the firmware.
This User Guide contains detailed information about the EtherNet/IP-
Modbus (application) firmware, which includes additional information
about the web configuration interface.
Locating the Latest Software and Documentation
Chapter 1. Introduction - 19
FTP