Instance Attributes - Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual

| Informational Objects | Ethernet Link Object (F6 Hex) | Instance Attributes |

2.2.6.2. Instance Attributes

This table displays the Instance Attributes for the Ethernet Link Object (F6 hex).
Attribute
Name
ID
Interface speed (Current
1
operational speed)
Interface Flags (Current
2
operational status)
3 Physical Address
7 Interface Type
8 Interface State
9 Admin State
10 Interface Label
11 Interface Capability
34 - Chapter 2. EtherNet/IP Interface Profile (ControlLogix)
Data Type
10=10 Mbit
UDINT
100=100 Mbit
Bit 0 =link status
(0=inactive)
(1=active)
Bit 1=Half/Full Duplex
(0=half duplex)
DWORD (2=full duplex)
Bits 2-4:
00 = negotiation in progress
01 = negotiation failed
02 = negotiation failed speed OK
03 = negotiation success
Array of 6 USINT MAC Address
USINT 2 = Twisted Pair
1 = Interface is enabled and
USINT
operational
USINT 1 = Interface enabled
USINT16 Length = 1 to 64 ASCII characters
Array of USINT <Default = IP address in
"xxx.xxx.xxx.xxx" format>
Capability bits - Interface
capabilities, other than speed/
duplex
UDINT
Value = 6
Bit 1: Auto-negotiate
Bit 2: Auto-MDIX
Struct of:
USINT Speed/Duplex Array Count = 1
Array of:
UINT Interface Speed - 10 or 100
Interface Duplex Mode
USINT 0=half duplex
1=full duplex
Data Value(s)
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Access Rule
Get
Get
Get
Get
Get
Get
Get
Get6