Key and Certificate Management Page
Use the following steps to change security settings in the DeviceMaster EIP-MOD.
1. Click the Network | Security.
2. Click the appropriate check boxes in the Security Settings page to enable or disable security accordingly.
3. After making changes, you must click Save.
4. You may need to configure security keys or certificates depending on your choices using the next
subsection.
6.4. Key and Certificate Management Page
For secure operation, the DeviceMaster EIP-MOD uses a set of three keys and certificates. These keys and
certificates are user configurable.
Note: All DeviceMaster EIP-MOD units are shipped from the factory with identical configurations. They all
have the identical self-signed, Pepperl+Fuchs Comtrol, Inc. Server RSA Certificates, Server RSA Keys,
and Server DH Keys.
For maximum data and access security, you should configure all DeviceMaster EIP-MOD units with
custom certificates and keys.
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
Chapter 6. Network Menus - 65