All Shared Memory Class1 Interface Page - Comtrol DeviceMaster EtherNet/IP-Modbus EIP-MOD User Manual

All Shared Memory Class1 Interface Page

7.5.2. All Shared Memory Class1 Interface Page
If the Display All Shared Memory button is clicked, the following page displays. This page is provided to show
the relationships of the active Class1 interface with the rest of the Shared Memory blocks.
The following table provides information about this page.
Active Rx Class 1 Configuration - Input (To PLC) Class 1 Interface
Holding Registers Block
1 - 8
Coils Block 1 - 8
Active Tx Class 1 Configuration - Output (From PLC) Class 1 Interface
Holding Registers Block
1 - 8
Coils Block 1 - 8
84 - Chapter 7. Data Mapping Menus
EtherNet/IP Class 1 Interface Page
Displays all shared memory blocks. The rows display the Instance Number,
Instance Length, and Maximum Connection length for the corresponding Rx
Holding Register Block.
Displays all shared memory blocks. The rows display the Instance Number,
Instance Length, and Maximum Connection length for the corresponding Rx
Coil Block.
Displays all shared memory blocks. The rows display the Instance Number,
Instance Length, and Maximum Connection length for the corresponding Tx
Holding Register Block.
Displays all shared memory blocks. The rows display the Instance Number,
Instance Length, and Maximum Connection length for the corresponding Tx
Coil Block.
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A