EtherNet/IP-Modbus Gateway Overview
-
Via Read-from-Tag/File and Write-to-File/Tag configurations
The most extensive Modbus functionality in the industry:
•
Up to 96 Modbus/TCP connections
•
Support up to eight unique Modbus TCP socket port numbers. (i.e. 502, 503, 505, etc.)
•
Multiple Modbus/RTU and/or Modbus/ASCII over Ethernet TCP connections
•
Local serial Modbus/RTU and Modbus/ASCII slave devices
•
Maximum sized Modbus messages
•
Serial Modbus/RTU and Modbus/ASCII masters
•
Shared Memory that can be configured to provide communication interfaces between a vast array of
Modbus slaves, Modbus masters and EtherNet/IP controllers.
•
Modbus Alias functionality
•
Remote Modbus device connectivity
•
Modbus slave to Modbus slave communication
•
Private Modbus serial bus connectivity – A serial port connected to a serial master and one or more serial
slave devices
A Data Mapping process that provides:
•
EtherNet/IP Tag/File to Modbus connectivity - to either Modbus device(s) or Shared memory
•
Modbus to EtherNet/IP Tag/File connectivity - from either Modbus device(s) or Shared memory
•
Modbus to Modbus connectivity
-
Can read from multiple Modbus devices into Shared Memory.
-
Can write from Shared memory to multiple Modbus devices.
-
Can read directly from one Modbus slave device to another Modbus slave device anywhere on the
Modbus network. These devices can be of any supported type, local or remote.
-
Can convert from Modbus register type to another automatically.
•
A Data Mapping verification web page that checks for possible Modbus write conflicts, incorrect
configuration and write violations.
•
A Shared Memory map web page that displays the Shared Memory read and write memory blocks as
defined utilized by the Data Mapping.
8 - Chapter 1. Introduction
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A