Table of Contents
Advertisement
Chapter 3. Configuration Overview
This chapter provides an overview of these topics:
•
3.1. Home Page
on Page 41
•
3.2. Serial Port - Configuration Overview
3.1. Home Page
If you have not configured the network information into the DeviceMaster EIP-MOD during initial setup, you
must configure the network information before configuring serial/socket port characteristics.
The latest EtherNet/IP-Modbus firmware must be installed before you can configure network or serial/socket
port characteristics. For firmware installation and setup information, see the
Hardware Installation and Configuration Guide
From PortVision DX, highlight the DeviceMaster EIP-MOD that you want to configure and click Webpage or
enter the IP address of the DeviceMaster EIP-MOD in the Address box of your web browser. The Home page
displays.
DeviceMaster EIP-MOD User Guide: 2000664 Rev. A
on Page 43
or the PortVision DX help system.
DeviceMaster EIP-MOD
Chapter 3. Configuration Overview- 41
Advertisement
Table of Contents
Troubleshooting
