System Data Clear; System Data Default Set - Panasonic KX-TD612CE Installation Manual

2.11 System Data Clear

2.11.1 System Data Default Set

When the system does not operate properly after restarting, you can clear the programming
data stored in the system. The system will restart with the default setting.
First, try the operation by following step 4 in section 2.7.1 Starting the System for the First
Time. If the system still does not operate properly, please follow the procedure below.
1.
Slide the system clear switch to the "CLEAR" position.
2.
Press the reset button (with a pointed tool, if necessary).
3.
While the power indicator starts flashing (within about 10 seconds), return the system clear
switch to the "NORMAL" position. If successfully executed, the DPTs should show the
time as 0:00.
CAUTION
• Before touching the system clear switch and reset button, put on a grounding strap.
• After pressing the reset button, return the system clear switch to the "NORMAL" position
in step 3 while the power indicator is flashing. Otherwise, the system data will not be
cleared.
• Even if you perform system data clear, OGM cannot be deleted. To delete an OGM, follow
the steps described in 2.5.1 Built-in Voice Message and 3.2.3 Recording Company Greeting
Outgoing Messages in User Manual. To delete all voice messages and OGMs at once, refer
to programme [895] OGM and Voice Message Clear.
• Feature Reference
• System Data Default Set
Installation Manual
System Clear Switch
CLEAR
NORMAL
Reset Button
Installation
77