Saving The System Data To The Backup Device (Save) - Panasonic KX-TVS90 Installation Manual

SYSTEM MAINTENANCE AND TROUBLESHOOTING
Table 31 Error and Warning Indications During System Operation
FLASH MEMORY STORAGE SPACE IS
NOW EXCEEDING
80%...
ASCII TERMINAL program Load Error

7.2.7 Saving the System Data to the Backup Device (SAVE)

All system programming data and voice prompts can be saved in separate data files. To save
this data, connect a data terminal to the RS-232C port of the VPS. Save the files individually.
Execute the SAVE command for each data file. It will require several minutes to execute this
command for all the data selected. When performing this operation, always wait until the
process completion indication appears.
WARNING
Never save (back-up) and upload the "Program" without Panasonic Technical support.
The memory required to save each data component is indicated below.
1. Program—approximately 1 Mbytes (See Warning above)
2. Parameters—approximately 0.4 Mbyte (System Configuration)
3. System Prompts—approximately 5 Mbytes (Do not save—prompts are
saved as defaults in the flash memory)
Saving items 4-7 below will depend upon the length of the recorded messages.
4. User Prompts-1
5. User Prompts-2
6. Custom Service Menus (Custom service recordings)
7. Personal Greetings (Subscriber greetings)
8. Company Greetings
164
Indication Meaning
80 % or more of the Flash Memory voice
message save area is used.
Error loading of ASCII terminal control
program.
Installation Manual