4.3
System Programming
Description
Selection
Default
Programming
Conditions
Feature References
ISDN DDI Translation Table
Assigns a destination location of incoming DDI numbers.
Incoming DDI numbers are received at extensions assigned to each
location number.
• Location number: 000 through 399
• DDI number: 16 digits max.
All locations – Not stored
1.
Enter 150.
Display: DDI Assign
2.
Press NEXT.
Display: Location No?→
3.
Enter a location number.
To enter location number 000, you can also press NEXT.
Display example: 000:Not Stored
4.
Enter a DDI number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and enter the new number
5.
Press STORE.
6.
To program another location number, press NEXT or
PREV, or SELECT and the desired location number.
7.
Repeat steps 4 through 6.
8.
Press END.
• The DDI number can be a maximum of 16 digits.
Valid numbers are from 0 to 9.
• Programs [151]-[152] "ISDN DDI Ringing Assignment — Day /
Night" are used to assign an extension to each location number in the
day and night modes.
• This program becomes available when "DDI" is selected in program
[452]-[453] "ISDN Ring Service Assignment — Day / Night".
Section 3, Features — in this manual
Direct Dialling In (DDI)
Integrated Services Digital Network (ISDN)
150
29