Operation; Safety Check General Information Readiness For Use Controls; Switching On Preparatory Work; Completed In Full - Hettich BlueMax Mini Modular Plus Operating Manual

Operation

8. Operation
1. Safety check
General information
Readiness for use
Controls
2. Switching on
Preparatory work
3. Operating
Hold-down clamp
Fitting Hettich hinges
Drilling
Pressing in
4. Malfunctions during operation
Troubleshooting
5. Checks during operation
Checks for proper working order
50
1. Safety check
CAUTION
50
This machine must only be operated and serviced by
50
skilled personnel who have been authorised or trained
50
to do so. Always observe the safety precautions and
internal safety rules.
51
Before switching the machine on, satisfy yourself that
52
• any installation, set up and servicing work have been
52

completed in full

52
• no persons are present in the danger zone,
53
let alone working on it
53

• all safety guards are fitted in the prescribed way

54

• the compressed air supply is ready for operation

54
55

General information

55

Before commencing production:

55
Make sure the machine is safe and in proper working order

before and after you switch it on.

55

Make sure the compressed air supply is ready for operation.

Make sure the machine has been set up for the relevant
product.
NOTE
Immediately inform your line manager of machine
malfunctions or faults.
Readiness for use

The machine is ready for operation if

• all of the above stated activation processes have been

carried out

• a trial run has been carried out

• the compressed air supply is activated

• the machine is set up for the relevant product

Production can now commence.