Table of Contents
Advertisement
Technical information
5. Technical information
1. Safety advice
2. Attachment points
16
16
1. Safety advice
Observe the regulations, warnings and provisions on health,
safety and environmental protection for all of the work
16
described in this section.
16
2. Attachment points
17
Only use suitable and approved lifting gear (crane) for
unloading the machine, assemblies and components as well
18
as for lifting heavy loads; only use appropriate means of
22
transport for handling the machine internally.
22
Any unloading or internal handling must not be done by hand
if such involves weights in excess of 25 kg.
23
When using industrial trucks to unload the machine and move
23
it internally, always take into account the machine's total
23
permissible weight (see Technical specifications).
23
23
Danger!
23
Never stand or work under loads suspended on lifting
gear. This presents the risk of fatal injury!
23
Observe the following when using lifting gear:
24
• Only attach lifting gear at the points marked (lifting
24
eyebolts etc.) on the machine / assemblies / components
24
• Only use appropriate and tested load suspension devices
24
(lifting belts, ropes, chains, shackles etc.) with a sufficient
load carrying capacity
24
• Only assign experienced, skilled personnel the task of
24
attaching the machine / assemblies / components
25
• Always ensure level standing for machine / assemblies, lift
vertically, never drag at an angle
25
Protect projecting machine parts and equipment from damage
25
when using lifting gear and moving the machine internally.
25
Set down loads gently with the usual care and take
25
immediate action to prevent them from falling over / tipping,
rolling away, suffering damage from external force, e.g.
25
colliding with industrial trucks and objects falling from above.
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the BlueMax Mini Modular Plus and is the answer not in the manual?
Questions and answers