Noise Mission; Aligning / Fastening; Aligning / Fastening General Information; Connections Required - Hettich BlueMax Mini Modular Plus Operating Manual

Area: motor / drive
Reminder to unplug the mains power plug before
changing tools
Fig. 13: Labelling – Motor / drive
Area: entire machine
Reminder to unplug the mains power plug and disconnect
compressed air before changing tools. Main switch does not
disconnect the machine from the compressed air system.
Fig. 14: Labelling – entire machine
Area: protective cover on tools
Labelling on laser beam
Fig. 15: Labelling – laser beam
Area: drill bits
Labelling on turning direction of drill bits
Fig. 16: Labelling – turning direction of drill bits

6. Noise emission

This machine operates at a noise level above 80 dB(A). We
recommend wearing ear protectors at all times to prevent
damage to hearing.
WARNING
Wear ear protection.

7. Aligning / fastening

General information
The machine should be installed on a level, load-bearing
stand with firmly standing feet.
Any machine must be installed in a way that prevents it from
moving about and tipping over.
NOTE
Securely installed machines prevent accidents.

8. Connections required

Main power connection

Connection to the electrical power supply is made by
connecting a 16 A plug
2
appropriate fuse protection.
Care must be taken not to damage electrical supply leads.
These must be changed whenever necessary.
NOTE
Before plugging in, instruct a qualified electrician to
check the socket.

Compressed air connection

The entire machine is connected to a central in-house
compressed air supply system.
The supply line is fitted with a plug in coupler
The operating pressure must be set to 6 - 7 bar at the
pressure regulator .
1
This must be checked at the pressure gauge.
NOTE
Only feed in dry compressed air as the pneumatic
system is largely operated on unoiled air.

9. Handling

The machine must only be transported and installed by
companies / persons instructed / authorised to do so by the
manufacturer or under the manufacturer's supervision.
After moving the machine, every part of it must be checked
for shipping damage as possible harm may impair system
operation and safety.
NOTE
To prepare transportation, please bear in mind the weight
of the machine!
The machine weighs approx. 145 kg.
to a prepared socket with
1
.
2
23