Nintendo GAME BOY Programming Manual page 165

d7
Byte 1
--
--
:
--
Byte 4096
--
The storage addresses are 3000h - 3FFFh.
Command: ATRC_EN (Code: 0Ch)
Function: Enables and disables attraction mode.
Enables and disables attraction on the picture frame.
The default setting is enabled (00h).
If the command is issued during attraction, attraction is stopped.
d7
0 1
00h
d7
01h -- --
Example: Attraction start duration for a model (type without communication connector).
The time required for attraction to start for each picture frame is as follows. (Times shown in
parentheses are times required to start attraction a second time.)
System Color Palette 000 bit 00 color
System Color Palette 000 bit 00 color code
System Color Palette 000 bit 01 color code
System Color Palette 000 bit 01 color code
: :
System Color Palette 511 bit 10 color code
System Color Palette 511 bit 10 color code
System Color Palette 511 bit 10 color code
System Color Palette 511 bit 10 color code
d0
1 0 0 0 0 1
d0
-- -- -- -- --
Chapter 6: The Super Game Boy System
d0
LOW
HIGH
LOW
HIGH
:
LOW
HIGH
LOW
HIGH
Number of packets: 1h (fixed)
Command code: 0Ch
0: Enables attraction
1: Disables attraction
165