Table of Contents
Advertisement
Configuration using Embedded Web Pages
Each IPL T S unit contains an on-board web server with interactive pages that can be used
to configure the device. web server pages are described in detail on the following pages.
Connecting Via the Web Server Pages
To connect to an IPL T S Series device via its web server pages:
1.
2.
3.
4.
Open a web browser on a local PC.
Enter the device IP address in the browser Address field and press the Enter key. If the
device is password-protected, you are prompted for a password.
NOTE: The factory configured passwords for all accounts on this device have been
set to the device serial number. In the event of an absolute system reset, the
passwords convert to the default, which is no password.
Figure 24.
web Server Password Dialog Box
Enter the appropriate administrator or user password.
Click OK. The System Status page opens.
Figure 25.
web Server System Status Screen
IPL T S Series • Introduction
21
Advertisement
Table of Contents
